Overview：Inorganic silicone is a kind of high active adsorption material,usually reaction with sodium silicate and sulfuric acid,after ageing,acid bubble a series process.As silicone inneral absords large moisture, so drying process is relatively slow，In drying process, we have to ensure the cerain drying tempeature and stay time.if drying speed is too fast, it will break the silicon. in the drying process, front portion is preheating, the temperataure is lower but belt speed is fast, to the back of the dryer, the temperature is higher and belt speed is lower.

Overview：The catalyst can change the rate of chemical reactions in a chemical reaction. Catalyst belt dryer sheet is widely used in food, agricultural products, dehydrated vegetables, herbs, aquatic products, native products, animal feed and chemical industries, the strip, massive and granular materials dehydration operations.

Overview：Pigments single belt drying advantages: heat exchanger placed in the lower position of the heating network to bring uniformity, high thermal efficiency. Multiple combinations can be used in tandem, effectively increasing the drying area. Cons: For a drying process is easy to produce powder material suited.

Overview：An amorphous silica material, insoluble in water and any solvent, non-toxic, odorless, chemically stable, does not react with any substance except alkali, hydrofluoric acid. silicone dedicated boiling dryer is consist of air filter, fluidized bed hosts, cyclone, bag filter, high pressure centrifugal fan, console components. Due to the different nature of the dry materials, while supporting removal equipment,you can select the cyclone, bag filter, can also choose one of them.

Overview：Magnesium, and generally contains six molecules of water of crystallization, deliquescent. Spray drying magnesium chloride machine is a suitable emulsion, suspensions, pastes, solutions and other liquid and dry special drying equipment.

Overview：It can recycle more kinds of organic solvents, as follows: alcohol (methanol), alcohol (ethanol), solvent recovery centrifugal spray drier dryer Spreading the material to be processed using multi mobile stainless steel mesh belt or vibrating plate, hot air through the bottom-layer network with its material on the heat exchange uniform, full, high production efficiency, product quality good, and has a cooling layer and rotating conveying device, the material temperature is low, conducive to the timely packaging.

Overview：Alumina is a white amorphous powder, commonly known as bauxite. Spray drying equipment working principle: air through the filter and the heater, into the air distributor on the top of the dryer, the hot air entering the dryer uniform with spiral state. Liquid from the tank through the filter material is pumped to the dryer by a centrifugal atomizer, so that liquid sprayed into tiny droplets of mist, liquid contact with hot air and flow, rapid evaporation of water, in a very short drying time powdery product. Finished product discharge from bottom of the drying tower and cyclone separator,exhaust air discharged from the fan.

Overview：Calcium phosphate also named tricalcium phosphate is white, crystalline or amorphous powder.hot air from the inlet tube to the appropriate speed spouted into the stirring and crushing and drying chamber from the bottom of the dryer, the material exerts strong shearing, blowing, floating and rotating effect, so the material by centrifugation, scissors cut, collision, friction is micronized, enhanced heat and mass transfer. At the bottom of the dryer, larger wet granules under the action of the agitator is mechanically crushed, the lower moisture content, smaller size particles are entrained in the rotating air flow increase, and further dried in the rising process.As the gas-solid flow in rotating inertia of the solid phase is greater than the gas phase, the larger the relative velocity between solid and gas phases, and strengthen heat and mass transfer between the two phases, the production strength is high.